The Signature Guide

Kaiaa

Staff
Project Staff
Joined
Sep 1, 2011
Posts
5,907
Bells
791
Sautéed Mushrooms
420
Switch
3954-2752-4988
Dark Easter Egg
Chao Easter Egg
Galaxy Easter Egg
Zipper Sakura
Nightmare Easter Egg
Rotating Fool's Egg
Blue Balloon
Green Balloon
Toy Hammer
Isabelle
Note: If you're looking for something specific and having trouble finding it, try Ctrl+f (Windows), Command+f (Mac) and search for a word related to your issue.

The pinnacle of individuality beyond usernames is the signature. The general rules about signatures are found on the Bell Tree Rules and Guidelines page but for a more in depth look at the signature rule, use this guide! What constitutes as a signature can be quite confusing at times but I'm here to show you everything you need to know about signatures and how to prevent the dreaded "signature warning"! So let's begin!
_______________________________________________________________________________

What does signature mean to TBT?
Signatures, as defined by the Bell Tree, include everything under the signature line.


This includes ALL Spoilers, text, AND Images you use in the signature. Signatures are NOT solely the image of your villagers so keep this in mind when editing your signature.
_______________________________________________________________________________

What is the maximum height for signatures?
The maximum height for a signature is 250 pixels in height.​

Q1LriJU.png
_______________________________________________________________________________

How can I tell if MY signature is in line with the rules?
There are several ways you can check to see if your signature meets the rule.​

PC users:
  • Print Screen with your signature on the monitor
  • Paste in Paint and crop to just your signature
  • Find the Pixel length of the canvas


MAC users:
  • Scroll to your signature
  • Press and hold: Command +Shift +4 ----- This will bring up a cross with numbers, the numbers represent pixels. You need to focus on the BOTTOM number for HEIGHT.
  • Move the cross to the top of your signature (about 1/2cm of white space down from the signature line.)
  • Click and drag the cross to the bottom of your entire signature (about 1/2cm of white space after the last thing in your signature.)
    - Do NOT stop at the picture. If you have text, multiple images, or spoilers, you must include them in the cross as well.
Chrome users:
  • If you are using Chrome, you may use the addon: "PageRuler". When using PageRuler you can measure the pixel dimensions of your signature.
  • Measure from the top of your signature (about 1/2cm of white space down from the signature line) to the bottom of your entire signature (about 1/2cm of white space after the last thing in your signature.)
    - Do NOT stop at the picture. If you have text, multiple images, or spoilers, you must include them in the cross as well.
After you have checked and if the total number of pixels exceeds 250 pixels, you WILL need to edit your signature to be shorter.

Eyeball method:
  • Look at your signature
  • Now look at this box:
    Q1LriJU.png
Is your signature (the ENTIRE signature, not just the picture) larger than this box? If so you need to scale down your signature so that everything you want in it fits into this box!

There are many other ways to check pixel height but now that you know a few, you can have a better idea of where your signature stands in height.
_______________________________________________________________________________

Things to Remember
  • Anything in the prohibited section of the Rules must stay out of your signature
  • Signatures include everything under the signature line
  • Signatures are only to be 250 pixels in height at max
  • Spoilers are your friend
  • Click Here to see the Bell Tree Rules and Guidelines
  • When in doubt, ask in this thread if your signature is within the rules

_______________________________________________________________________________

FAQ

Quite a few of you have asked how to do specific things relating to images themselves. Threads pop up in the HQ all the time that ask questions such as: How do I use an animated gif? Or, How do I make everything centered? Look no more, here, I’m going to explain how to do specific signature-related things that you may find helpful.

Q: How do I center my entire signature?
A: First off, you’re going to use our lovely BB code for it. If you’ve ever used advanced mode when posting, you’ll notice it puts a bit of code into your post. It’s the exact same for signatures, except there’s no handy-dandy tool that just lets you press a button to do it. The BB code for center is:

HTML:
[CENTER]Centered stuff[/CENTER]

Q: How do I make an animated gif as my signature?
A: First you’ll have to have an animated gif available to use. Usually it’ll be saved to your computer at this point, or you’ll be given a link to save and upload for yourself. You can’t upload your signature with our tools here, so you’ll have to use an outside source. Usually I recommend using an outside upload tool anyway so that you can reference it later in an album, even if you’re not using it. There are a number of websites that will allow for it, and creating an account can save your pictures for years.

Imgur.com
Photobucket.com
NOTE: Tinypic is known to occasionally swap out your images so we highly recommend using one of the above sites instead.

These are the big ones. Remember, if you don’t create an account, usually your image will only be available for a certain amount of time, so remember that you have to use one or it may be deleted while you’re still using it (oh no!)

After you upload the image, you can copy and paste the direct link into image tags, which I’ll show you below. You can preview your signature to make sure it works, and go further into stylizing your signature with text, or even spoilers to show off some of the things you’re most proud of. Please keep in mind, signature size rules include all text, images, and closed spoilers.

HTML:
[img]Http://imgur.com/linklinklink.jpg[/img]

Q: How do I take a screenshot or crop an image?
A: There’s many ways to do this. If you’re trying to take just a screenshot, refer to the below guide.

Windows: To take a screen shot you’re going to locate print screen button on your keyboard. When you’ve pressed it with the image on the screen that you’re trying to take a picture of, you can open paint, press control+V or Edit>Paste. It will paste your entire screen in the document. You can use the select tool (the dotted line box) and you can select “Crop” from one of the menus.

If you’re using Windows 7, you’ll have a snipping tool available from the Start Menu. (HINT: Type it in the search box) Select it, and if you feel like you’re going to be taking many screenshots, pin it to your task bar. With this tool you can clip a selected portion of your screen and save just that as an image file directly to your computer for uploading on an image sharing website.

Mac: Taking a screenshot on the Mac is much easier. On your keyboard, locate Shift+Command+3. This will take a screenshot of your entire, visible screen. You can again, edit this down in an image program, or online. Mac does not have a native program like paint, but your screenshot will save to your desktop for easy uploading.

Alternatively, use Shift+Command+4 to screenshot a specific selected region on your screen, which will also save to your desktop for easy uploading.

On many image sharing websites, you can edit your image by resizing it and cropping it. Be advised, gifs can NOT be edited through those websites. Save your image to your computer, and use:

http://www.online-image-editor.com/

You can edit down the size of your gifs and pictures at this website, and this also works for avatars. This is the website that I use to make signatures and edit down my avatar size to the 100x100 standard, and KB image size that TBT requires.

Q: How do I make a signature or an avatar?
A: With all of the combined methods above you can easily create a simple image for your signature. Otherwise, you’ll need an image editing program like Gimp or Photoshop to play with layers, effects, and text. This is very advanced, and if you would like to get into this kind of signature creation, then I suggest a guide. I will not be making one. This will have to be done ON YOUR OWN.

Alternatively, there are a number of wonderful “GFX” (graphics) designers on this website that will either charge you some TBT bells, ACNL bells, or sometimes even do it for nothing at all. You can find these wonderful sellers in the TBT Marketplace, or the Museum. Please be advised, some people will charge, and they do take a while or have orders that need to be placed before getting to you. Find someone who you like the style of, make a request only after reading their rules. These designers are usually seasoned, and will create something with an image you like, or with a style you enjoy. They’ll give you the image to save and host yourself. Never rely on someone to host your image for you, it’s rude and takes up their space.

This applies as well to avatars.

Q: How do I make a rotating/cycling/changing signature?
A: A couple of hosts will give you the BB code to use multiple signatures that change when the page is refreshed. The one that I’ve seen most used is below:

http://signavatar.com/

Q: Can I make a rotating avatar?
A: Rotating avatars are not supported. There are no plans to implement this either. Please do not ask about this.

Q: How do I make a transparent background on an image for a signature or icon?
A: Most of the time, this is where an image editing program like Gimp or Photoshop is needed. You will need to cut the parts of the image away that you don't want and leave it on a transparent layer, and then save it in a format that supports transparency. The most used ones are GIF and PNG.

If you don't know how to do this, the online image editor linked earlier has a transparency tool that will cut everything of the same color away. For example, if you have a picture of a character on a white background, you can use the transparency tool to cut away all the white in one click, and save it out like that to be uploaded to your image host of choice.

Other than that, you may have to ask a GFX editor on the site to do it for you, but be aware they have the right to reject or charge you for the trouble. If the specified item you want cut out is on a "busy" background, they may have to spend a bit of time to get it to look good for you. Be respectful, and always remember that this is work that they're doing with their time!

Q: How do I get an image editing program? I don't have one!
A: You have a couple of choices here. Gimp is one of the preferred programs because it's free. There's no trial period, and you can jump in with some tutorials and get right down to work. Many people find Gimp confusing though, so remember that searching "Gimp Tutorial" on Google may be worth the time.

http://www.gimp.org/

There's also Adobe Photoshop. You can get a thirty day trial of the program from their website, but afterwards you will have to pay to use it. Adobe programs are highly expensive, because they are known for professional quality and generally easier to use with more options for brush customizations. Keep in mind, we will not help you get this program for free.

http://www.adobe.com/

Q: This is too hard! I just want to make a signature!
A: If you find this difficult, I highly suggest paying someone to make a signature for you.

Q: Where can I find villager sprites for my signature?
A: In this one situation, I'm not going to hand you a link. I would like for you to use google or ask others that have this who they got them from. There's a very good reason for this.

Anytime you use someone else's work for your signature, you are using their labor in your signature. Even if you paid for it here, you need to use a SOURCE in your signature! Some signatures will say the artists name on it, or some people have a nice "Thank you [artist]!" in small text. When it comes to using villager sprites, MOST artists want some sort of link back to their website, and you are REQUIRED to follow this rule for them!

So, I want YOU to find the source, and make sure you CREDIT the artist with a link back to their website, or their TBT profile under your signature. Alternatively, you can make your signature a CLICKABLE link IMAGE.



HTML:
[URL="http://i.imgur.com"][img]http://i.imgur.com/ZUhZIrZ.gif[/img][/URL]

This is an example of what one looks like, and the code for it. The image is my signature, but the LINK leads back to IMGUR.com. You don't have to link back to your host, but if you didn't make it, you can always link back to that person's profile!
 
Last edited by a moderator:
While these aren't the best looking examples, they will give you an idea of what is and isn't acceptable to use as a signature. If you have any questions or want your signature checked out, feel free to consult the examples below or ask in a comment.
Examples:
The Good

Visit my dream town! 1234-5678-9101​
Visit my town: 1234-5678-9101
Dreamies:Genji, Angus, Mott, Gala

The Bad
Welcome to Rosewood! If you want to visit me just send me a PM :) FC: 1234-5678-9101

The Ugly

My Dream Town: 1234-5678-9101
Mayor: Cyclops
Town Name: Olympus
Native Fruit: Peach
FC: 1234-5678-9101
If you want to visit me just send me a PM! I'm totally not reusing a signature with a different town name on it. I'm totally Cyclops from Olympus. Do me a favor and just pretend it says Olympus for the sake of this guide.

As you can see, I can't make signatures so I may end up stealing a few of yours (with permission of course) to be featured in the guide. I hope that this guide helps you serve yourself so that you can avoid those pesky Signature warnings!
 
Last edited:
As a request, this is how you make a table so that you can have your images side by side with your spoilers without having to scale down 250 pixel tall images!

HTML:
[table="width: 715]
[tr]
[td]Whatever you put here will show up on the left side of the table[/td]	
[td]Whatever you put here will show up on the right side of the table[/td]

[/tr][/table]

Example:

[table="width: 715]
[tr]
[td]Whatever you put here will show up on the left side of the table[/td]
[td]Whatever you put here will show up on the right side of the table[/td]

[/tr][/table]
 
Last edited:
Some nice examples :)

- - - Post Merge - - -

By the way I hand built mine from scratch :)
 
As a request, this is how you make a table so that you can have your images side by side with your spoilers without having to scale down 250 pixel tall images!

HTML:
[table="width: 715]
[tr]
[td]Whatever you put here will show up on the left side of the table[/td]	
[td]Whatever you put here will show up on the right side of the table[/td]

[/tr][/table]

Example:

[table="width: 715]
[tr]
[td]Whatever you put here will show up on the left side of the table[/td]
[td]Whatever you put here will show up on the right side of the table[/td]

[/tr][/table]
Thansk!!
 
Is mine okay?

- - - Post Merge - - -

Nevermind, put it in a spoiler.
 
I don't really understand why mine was flagged, but I ended up editing out a couple text lines. If for some reason it's still prohibiting anything, let me know.
 
is mine too big?

- - - Post Merge - - -

[table="width: 715]
[tr]
[td]
EMmFzuW.gif

test.
[/td]
[td]
JZdLfqN.png

[/td]

[/tr][/table]
 
Last edited:
Ryan, if you are using the one in your example, it's within the measurements so you are more than welcome to use it :)
 
wow wow wow NVM right as I posted this it shows up! <3 <3
Thank you haha xD p.s. love clannad! :D
 
Last edited:
So if i put a picture in a spoiler, no matter what the size, it only counts as 50 pixels?
Plus, i just measured mine, and im gonna go edit it now...
 
Last edited:
So if i put a picture in a spoiler, no matter what the size, it only counts as 50 pixels?
Plus, i just measured mine, and im gonna go edit it now...

Yes, you can put any size picture in your spoiler and it will count as 50 pixels, but try to keep it reasonable so that people who do choose to open your spoiler don't have a very very large picture opened up. I can't wait to see your new signature! Thank you for reading the Signature Guide <3
 
Back
Top